musamman lantarki rebar thread sabon na'ura
Sigar Samfura
| Samfura | JB40 | Ƙarfin Ƙarfi | 4.5KW |
| Ya dace da Diamita na Rebar | 16-40 mm | Lantarki (mai iya canzawa) | 3-380V 50Hz ko wasu |
| Matsakaicin Tsawon Zaren | 100mm | Gudun Juyawa | 40r/min |
| Yanke Wurin Zare | 60° | Nauyin Inji | 450kg |
| Chaser Thread Pitch (na al'ada | 2.0P don 16mm;2.5P don 18,20, 22mm;3.0P don 25,28,32mm;3.5P don 36,40mm | Girman Injin | 1170*710*1140mm |
Ƙa'idar Aiki
Na'ura mai ba da hanya tsakanin hanyoyin sadarwa sabon sabon ɓullo da high-daidaici na'ura mai aiki da karfin ruwa yankan kayan aiki.Yana da halaye masu dacewa da ɗaukar hoto, kyakkyawan bayyanar, babban aikin yankewa da ƙananan yanki na damuwa.Kayan aiki ne mai kyau don gine-gine, masana'antu, ma'adinai da sauran raka'a, kuma yawancin masu amfani suna son su sosai.
Lokacin da ake yanke karfe, da farko kashe na'urar kewaya mai, cire hannun mai motsi don yin plunger da famfo aiki, sanya matsa lamba mai ya matsa babban piston don tura ruwa, kuma yanke kayan (kada ku ci gaba da dannawa, in ba haka ba). sassan zasu lalace).Ba za a yanke kayan kamar bakin karfe ta wannan hanyar ba.
Hanyar aiki
(1) Za a ajiye kayan aiki don karɓa da isar da kayan aiki a kwance tare da ƙananan ɓangaren mai yankewa, kuma za'a iya ƙayyade tsawon aikin aiki bisa ga tsawon kayan da aka sarrafa.
(2) Kafin farawa, duba kuma tabbatar da cewa mai yankan ba shi da tsagewa, an ɗaure kullun mai riƙe da kayan aiki kuma murfin kariya yana da ƙarfi.Sa'an nan kuma juya juzu'in da hannu, duba izinin haɗa kayan aiki da daidaita shingen yanke.
(3) Bayan farawa, dole ne a fara aiki da farko, kuma za'a iya aiwatar da aikin bayan an duba cewa duk sassan watsawa da bearings suna aiki akai-akai.
(4) Kada a yanke kayan lokacin da injin bai kai ga saurin al'ada ba.Lokacin yankan kayan, za a yi amfani da sassan tsakiya da ƙananan sassa na mai yankewa, ƙarfafa ƙarfafawa za a kama shi sosai, daidaitawa tare da gefen kuma sanya shi cikin sauri.Mai aiki zai tsaya a gefen kafaffen ruwa kuma ya danna ƙarfafawa tare da karfi don hana ƙarshen ƙarfafawa daga fitowa da cutar da mutane.An haramta shi sosai don riƙe ƙarfafawa a bangarorin biyu na ruwa da hannaye biyu kuma lanƙwasa don ciyarwa.
(5) Ba a yarda a yanke abin ƙarfafa wanda diamita da ƙarfinsa ya zarce wanda aka kayyade akan farantin suna da jajayen ƙarfafan konawa ba.Lokacin yankan ƙarfafawa fiye da ɗaya a lokaci ɗaya, jimlar yanki na giciye zai kasance cikin kewayon da aka ƙayyade.
(6) Lokacin da za a yi shearing low gami karfe, babban taurin abun yanka za a maye gurbinsu, da shearing diamita zai bi da tanadi na inji nameplate.
(7) Lokacin yanke gajerun kayan, nisa tsakanin hannu da mai yankewa za a kiyaye shi fiye da 150mm.Idan ƙarshen riƙewar hannun bai wuce 400mm ba, za a danna guntun kan ƙarfafawa ko manne da hannu ko manne.
(8) Yayin aiki, an hana kai tsaye cire ɓangarorin da suka karye a kusa da abin yanka da hannu.Wadanda ba masu aiki ba ba za su tsaya a kusa da jujjuyawar sandar karfe da abin yanka ba.
(9) Idan akwai aikin injin da ba na al'ada ba, sauti mara kyau ko skewed cutter, dakatar da injin nan da nan don kulawa.
(10) Bayan an yi aiki, yanke wutar lantarki, cire kayan aikin da ke cikin dakin da aka yanke tare da goga na karfe, sannan a tsaftace da sa mai gaba daya na injin.
