GF32 Cnc Automatic Steel Wire Round Bar Bender Hooping rebar bending machine factory low price better quality 32mm hoop bender
|Voltage||3-380V 50HZ||3-380V 50HZ||3-380V 50HZ|
|Common Carbon SteelØ4-Ø20mm||Common Carbon Steel Ø4-Ø25mm||Common Carbon Steel Ø4-Ø32mm|
|Grade Ⅲ Deformed Bar Ø5-Ø16mm||Grade Ⅲ Deformed Bar Ø5-Ø20mm||Grade Ⅲ Deformed Bar Ø5-Ø28mm|
♦ Standard angle,fast speed. Convenient of angle adjustment,just need to press the button on the operation panel.
♦ Convenient use,light and handy,safe and durable.
First the motor rotates clockwise, decelerated by the gearbox via V-belt, then the work plate starts to turn drove by the main output shaft of gear box, when reaching definitive angel, angle adjustment assembly (at bottom of main output) cut off travel switch normally-closed contact, cut in normally-open contact or light-controlled received headers; cut contactor of motor clockwise, connect contactor of motor anticlockwise, then motor begins to rotate reversely. When work plate returns to initial position, light-controlled received headers automatic power off, motor stopped, then finished.
Installation and Packing
1、Before use it, check if some screws of whole machines including electricity parts loosen or damages during the transportation.
2、Must install earth leakage circuit-breaker and connect earth ground when use it.
(1)It is clockwise rotation when the motor works, and it is anti-clockwise rotation when motor goes back.
(2)Adjust the depth of parallelism and gap between the retaining plate and bending workpiece according to bending workpiece diameter.
(3)Adjust the induction magnetic of angle adjustment assembly, turn it clockwise, then angle become smaller, and vice-versa. (GF20)
(4)Adjust the CNC controller on operation panel, press + to add angle degree, press - to reduce angle degree. (GF20CNC, GF25CNC)
(5)We adopt two foot pedals for 90°and 135°(180°), these angles are frequently used.